++NLI++ Automatic Bagging Machine：3CM-5B

Home > Products > Automatic bagging system > Automatic bagging machine > 3CM-5B

Automatic
bagging machine

　

　

Automatic
bagging machine

EFS-22

6CM-P

3CM-PDS

3CM-PS

3CM-P

3CM-3

3CM-5

3CM-5B

3CM-5BG

3CM-52

3CM-55

3CM-3G/5G

FG-series

　FG-BD

　FG-B

　FG-C2

3CM-53

4K-2S

4K-2DS

3CM-5X-1

3CM-5X-3

Bag closer system

Related equipment

AUTOMATIC BAGGING MACHINE
3CM-5B

Compact body, small footprint, and low cost.
Offered with a bag turn-down device.

The uniquely designed post-filling bag traverse and discharge is performed on a carrier table. All operations are performed efficiently, including product feeding, bag pickup and clamping, filling, bottom tapping, forming, traversing and discharging.

3cm-5b

Specifications
Model		3CM-5B
Capacity※1		120 bags / hr max.
Set weight		20 - 30 kg / bags
Bag type		Paper
Bag size ※２	Width of empty bag	380 to 460 mm
	Length of empty bag	750 to 950 mm
Air consumption		Approx. 300 NL / min (0.5MPa), using vacuum generator
Power requirements		1.5 kW (excl. vacuum generator)
weight		0.8 t

※１For sewing speed 6m/min. 150 b/h for sewing speed 8m/min.
Varies with the product and operating environments.
※２Contact us for applications involving common use of different bags, use of special bags, and bag dimensions and set weights outside the above range.

Names of Units

① Feeder
Bags are placed neatly with top opening facing forward. The magazine holds approximately 50 bags.

② Pickup Unit
Bags are picked up one by one, turned 90 degrees, and set on the filling station.

③ Clamping Unit
Each bag is clamped at both edges with a 30mm wide clamp.

④ Bag Opening Unit
Suckers pull the bag mouth open with a vacuum generator. Timing is adjusted to each application.

⑤ Filling Station
Products is smoothly filled using the expansion spout.

⑥ Carrier Table and Bottom Tapper
The carrier table moves to the hopper position as filling starts. The bottom tapping plate supports and taps the bag from below to facilitate settling of product in the bag.

⑦ Bag Former and Gripper
After the gussets are stretched out, the bag mouth is neatly formed and held between press bars to the hopper, and on the carrier table. The carrier table transports the bag to the closing station while being firmly gripped on both ends.

⑧ Sewing Machine (DS-6AC)
The sewing machine starts operation upon detecting an approaching bag and sews it closed during traverse. The grippers release the bag and the sewing machine stops upon detecting the trailing edge of the bag.

⑨ Discharge
The carrier table stops at a preset position. The bottom tapping plate inclines and the bag slides off the machine.

Outoward Dimensions

3cm-5b

Discharge direction

Feed direction

●Feeder and discharger may be installed in reverse direction.
○Dimensions vary with specifications.

●Specifications may be changed without prior notice.
●There may be differences between shown picture and specifications of each model.
●Reproduction without permission is prohibited.