The photo shows Model Rbl|Taf
@@@@@@@@ with options (free roller conveyor).
Place bags neatly with top opening facing front. The magazine holds approximately 50 bags.
Bags are picked up one at a time, turned 90 degrees, and set on the filling station.
Each bag is clamped at both edges with 30mm wide clamps. Clamping is checked to insure accuracy.
CBag Opening Unit
Suckers pull open the bag mouth and then release using a vacuum generator. Timing is adjusted with the pickup and takeout.
The clamps shift inward when the bag mouth is opened by vacuum.
The specially designed expansion spout (conventional hopper that is turned 90 degrees) fills the product.
The clamps stretch out to spread the gussets after filling.
The clamp and filling station is suspended on three load cells. Auto zero adjust is performed automatically with empty bags.
FCarrier Table and Bottom Tapper
The carrier table moves to the hopper position as filling starts. The bottom tapping plate supports the bag from below and taps the bag to facilitate settling.
||120 bags / hr max.
||20 - 30 kg / bags
|Width of empty bag
||380 to 460 mm
|Length of empty bag
||750 to 950 mm
¦PSewing speed of 8m/min. Capacity varies with the product and operating environments.
¦QContact us for applications involving the use of different bag types, use of special bags, bag dimensions and set weights outside the above range.
After the gussets are fully unfolded, the bag mouth is neatly formed and held between press bars on the hopper and the carrier table.
The carrier table transports the bag to the sewing head while the bag is firmly gripped from both sides.
ISewing Machine (DS-6ACj
The sewing head starts operation upon detecting an approaching bag. The grippers release the bag. The sewing head stops upon detecting the trailing edge of the bag.
The carrier table stops in a preset position. The bottom tapper inclines and the bag slides off the machine.